|
|
|
Thermal Angel Blood and IV Fluid Infusion Warmer
Catalog Number: TA-200
NSN Number: 6515-01-500-3521
The Thermal Angel is an in-line, battery-powered disposable, lightweight and completely portable blood and IV fluid warming device, capable of intravenous application and irrigation warming. The Thermal Angel can be used to help prevent fluid-induced hypothermia.
|  |
Features Include:
- Lightweight (9 oz), in-line, disposable, portable battery-powered blood and IV fluid infusion warmer
- No cartridges or cleaning
- Inserted below standard IV tubing, coming from the bag and before the extension set leading to the infusion site
- Quick setup within 30 seconds
- Warms in approximately 45 seconds
- Placed at or near the infusion site for minimal heat loss through tubing
- Failsafe to prevent overheating
- Ability to remain with patient from first contact through hospital stay
- Can be used in the field, ambulances, helicopters, ER, OR, military and other care areas
- The unit uses standard luer fittings and will accept all standard IV line sets
- Single patient use
- Heaters adjust automatically in response to changes in flow rate
- Disposable
- Innovative Technology
Performance:
The Thermal Angel TA-200 will strive to achieve 38°C (100.4°F) ±3°C at a flow rate of 2 to 150 ml/min given a fluid input temperature of 20°C (68°F) with a fully charged TA-BCE Battery.
Areas of Use:
Quick Set Up:
Because the Thermal Angel is elegantly simple, there are no knobs, settings or switches. An experienced user can set up the Thermal Angel in a matter of seconds.
Training:
The 5 Steps are printed on the Thermal Angel label, bag, and instruction insert. Furthermore, there is an instructional video available on the Thermal Angel website which can be viewed in less than 3 minutes.
Compatibility:
The Thermal Angel was designed to be compatible with any standard IV or blood administration/extension set.
Portability:
Because the Thermal Angel is Battery powered, it allows for a continuum of care with no interruption of the infusion of warm blood or intravenous fluids. The Thermal Angel can be used at first contact with the patient, whether at a trauma scene, in transport to a healthcare facility, or inside a hospital, clinic or surgery center.
Low Capital Equipment Expenditures and No Contract Requirements:
The Thermal Angel was designed to require a minimal capital expenditure with no commitments in order to encourage warming for all patients, not just a select few cases.
Disposables and Movement of Patients Between Departments:
Since the Thermal Angel is a portable, battery-powered single patient device, there are no additional costs due to movement of patients. The Thermal Angel stays with the patient throughout the continuum of care to virtually any department the patient visits, untethered by the requirements of AC power. There are no new disposable costs from OR, to Recovery, to ICU, and finally, to the patient room. Because the Thermal Angel is elegantly simple, there are no knobs, settings or switches. An experienced user can set up the Thermal Angel in a matter of seconds.
Innovative Technology:
More Information:
External Physical Specifications:
| Length | 9.0 in (22.86 cm) |
| Width | 2.8 in. (7.11 cm) |
| Depth | 0.95 in. (2.41 cm) |
| Weight | 9.2 oz. (260.82 g) |
Thermal Angel TA-200 Absolute Minimum and Maximum Specifications:
|
Minimum
|
Maximum
|
| Output Temperature: | NA | 47°C (116.6°F) failsafe fuse |
| Input Temperature: | 4°C (39.2°F) | 38°C (100.4°F) |
| Input Flow Rate: | 0 ml/min | 200 ml/min |
| Input Voltage: | 10.5 Volts DC | 13.8 Volts DC |
| Storage Temperature: | 0°C (32°F) | 40°C (104°F) |
Download Adobe Acrobat PDF Version Here 
|
|
|
Contact Us
